Logo Allmyblog
Logo Allmyblog
Lien de l'article    


A OBD2 blog to share diagnostic tool
Contacter l'auteur de ce blog

- Good tool for ECU tunners: BDM Adapters Full Set
- Latest Launch X431 Scanner Price
- Guide to Connect MB SD C4 Lan and WiFi step by step
- Several kinds of car ECU introduction
- Take Launch X431 V as consider to do Ford module programming

<< Janvier >>

Ajouter eobdtool à vos favoris
 What is the new functions of SKP1000 Alerter l'administrateur Recommander à un ami Lien de l'article 

Note: If the door is automatically locked and unlocked twice, the car key programming process is not fully completed. Need to re-carry the car key programming process. Follow the steps above to use SKP 1000 auto key programer program the remaining keys. here is: http://www.eobdtool.co.uk/wholesale/skp1000-tablet-key-programmer.html Audi A6L sedan equipped with SKP 1000 TABLET 09L-type automatic transmission is the German ZF company produced 6HP-19A automatic transmission, which automatic transmission using five terminal shift actuator (A, B, C, D, E) control 1 Ravine planets and a special single-stage single row to complete the six forward gear and a reverse gear transmission power transmission process. Combined with the automatic transmission gearshift actuator worksheet (Table 1) and the actual failure of the phenomenon of analysis, you can first bring down the problem to the side, on the serious uplift slippery and shock phenomenon analysis. know more: www.eobdtool.co.uk

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 07-08-2017 à 11h22

 BMW CGDI, un produit technique élevé Alerter l'administrateur Recommander à un ami Lien de l'article 

Tout d'abord, la télécommande anti-vol LED BDM
    1. Fonctionnement du système BMW MSV80:     (1). Appuyez sur le bouton "VERROUILLAGE" pour activer le système anti-vol, verrouillage central et double verrouillage;     (2). Maintenez la touche "LOCK" enfoncée, fermez la fenêtre et fermez la lucarne;     (3). Si vous déclenchez accidentellement le bouton "VERROUILLAGE", procédez comme suit:      Appuyez et relâchez le bouton "UNLOCK";      Appuyez sur le bouton "VERROUILLAGE" et maintenez-le enfoncé;     (4). Un capteur de surveillance anti-vol et un capteur de surveillance intérieur pour soulever la méthode, vous pouvez effectuer les procédures suivantes:          ① dans l'activation du système anti-vol, verrouillage central et double verrouillage, appuyez sur le bouton "VERROUILLAGE";     ② jusqu'à ce que l'anti-vol, le verrouillage central et le système à double verrouillage soient relâchés, le capteur de sécurité anti-vol et le capteur de surveillance intérieur ne fonctionnent pas;     2.Programmation CGDI Prog BMW MSV80
:     Lorsque la nouvelle clé ou remplacez la clé lorsque le contacteur d'allumage est éteint et que vous pouvez accéder à la programmation de touches '     3. CGDI Prog BMW MSV80 Remplacez la batterie:     Pas besoin de remplacer la batterie, chaque touche peut être utilisée une fois que la batterie est chargée;     Deuxièmement, la puce anti-vol     1. Fonctionnement du système:     L'allumage s'éteint après la sécurité du système 10S;     2. Programmation: Lorsque CGDI Prog ou remplacer une clé, remplacez la clé associée au système anti-vol et exécutez la procédure suivante: la nouvelle touche peut être programmée en allumant et éteignant le contact. Si vous souhaitez en savoir plus, vous pouvez vous adresser à: http://www.eobdtool.co.uk/

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 09-08-2017 à 11h02

 Collection from forums shows why select VAS6154 diagnostic tool Alerter l'administrateur Recommander à un ami Lien de l'article 

This will be the case, VAS6154 with your use or have a great relationship, according to the use of automatic transmission practices, Auto Diagnosis block is generally only in the rain, snow weather conditions, the road adhesion is low when used, it will improve The engine of the turn, gear driving, due to good road conditions, the speed will rise quickly, and this time because the limited speed transmission and will not shift operation, and thus the engine speed not only increased, resulting in huge heat, VAS6154 OBD Tool and these heat baking Baked into the car's interior trim or ternary catalytic device, it will produce a vague taste. http://www.eobdii.fr/ Therefore, VAG diagnostic tool in the case of good road conditions, should avoid the use of L block cars, on the one hand is conducive to improving the speed and reduce fuel consumption, while the other people can make your car's engine, transmission from damage.

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 16-08-2017 à 08h11

 400+ times tested, YHBMW FEM key programmer is OK Alerter l'administrateur Recommander à un ami Lien de l'article 

The ECU has a learning function, but once the ECU's power supply circuit is cut off (such as removing the battery), YH BMW FEM
stores data that is stored during the operation of the engine. Therefore, Yanhua BMW FEM Key Programmer Support BMW F-chassisif the battery is disconnected, if the engine is not working as before , First do not casually replace the parts, because this situation may be broken after the battery ECU repair memory to eliminate the reason. Because the ECU Yanhua FEM diagnosis according to the actual situation of the system to learn to amend and according to the manufacturers stored in the read-only memory (ROM) in the data control, compared to the engine operating conditions will be different. If this is the case, the YH BMW FEM
will automatically create a correction memory after the engine has been running for a while. If you want the ECU to completely "restore memory", you need to pass the road under different conditions to re-learn the ECU to restore the basis of learning, engine failure will automatically disappear. http://www.eobdtool.co.uk/wholesale/bmw-fem-key-programmer.html

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 17-08-2017 à 08h51

  Alerter l'administrateur Recommander à un ami Lien de l'article 

Maintenance personnel to detect the engine control unit, found fault code 17837 - brake vacuum pump circuit open circuit. Unplug the brake vacuum pump connector, check found T6k / 5 feet from the fuse S51 30 power supply, T6k / 1 feet off the normal iron. Check that the fuse S51 has been blown. One end of the jumper wire is used to contact the power supply side of the brake vacuum pump motor, and the other end touches the positive pole of the battery, and the motor does not rotate. Indicating that the motor has failed. CGDI Prog BMW MSV80 BMW CGDI Prog Car Key Programmer for BMW Maintenance personnel test, found that the car engine idle running smoothly. Detection of the transmission control unit, found fault code 18265 - engine load signal error. And then detect the engine control unit, the fault code for the 16486 - air flow meter signal weak and 17545 - mixed gas is too thick. CGDI MSV80 Key Programmer highlights: Read the idle measurement of CGDI Prog groups of 4 areas of data, air flow of 0.0 g / s, abnormal. Check that the air flow meter harness is good and the power supply is normal. Hand over the air flow meter to the turbocharger hose, the hose was sucked at the same time the engine flameout, indicating that the air intake system without leakage point, the problem should be on the air flow meter. Troubleshooting: After CGDI BMW MSV80 replacing the air flow meter, the air flow data becomes 5.3 g / s. But for the forward gear when the impact is still, and the engine running for some time, the air flow down to 3.2 g / s, the arrival of the impact disappeared. This CGDI car key programmer means that the transmission control unit has started to normally use the data sent by the engine control unit. So, clear the fault code delivery. Free update software: 001: CAS 002: CAS4 CAS4+ 003: Engine EME CGDI MSV80 Key Programmer Description: CGDI Car Key programmer for BMW CAS1/CAS2/CAS3 CGDI Key Prog Support CAS4 /CAS 4+ Key Matching and All key lost CGDI Key Programmer BMW CGDI is high technical products which mainly doing Auto diagnose, programming, security maintenance. CGDI Prog BMW MSV80 Key Programmer For BMW Features: software response fast, short time programming, its has new breakthrough in operation safety and technical support. BMW CGDI MSV80 Auto Key Programmer CGDI MSV80 BMW Car Key Programmer with OBD Functions

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 22-08-2017 à 09h07

|<< <<<  1   2  | 3 |  4   5  >>> >>|

Fil RSS 2.0
Ajouter à NetVibes
Ajouter à Google
Ajouter à Yahoo
Ajouter à Bloglines
Ajouter à Technorati

Allzic en direct

Liens Commerciaux
L'information à Lyon
Retrouvez toute l'actu lyonnaise 24/24h 7/7j !

L'information à Annecy
Retrouvez toute l'actu d'Annecy 24/24h 7/7j !

L'information à Grenoble
Retrouvez toute l'actu de Grenoble 24/24h 7/7j !

Application Restaurant
Restaurateurs, demandez un devis pour votre application iPhone

Fete des Lumières
Fête des lumières : vente de luminaires, lampes, ampoules, etc.

Votre publicité ici ?
  Blog créé le 08-07-2017 à 05h37 | Mis à jour le 07-12-2017 à 09h40 | Note : Pas de note